Is It Better To Mount Blinds Inside Or Outside?

Can you outside Mount roller shades?

Your window shade can be installed either inside the window frameor outside the window frame or on the ceiling.

When measuring and installing shades, make sure there is a “play” between the roller and the brackets.

Shades mounted too tight in the brackets will not function properly..

Can cellular shades be mounted outside?

Cellular shades are easy to install for an outside mount. A screwdriver is all that is needed to install your shades, or, for an easier installation, you can use a cordless screwdriver or a drill with a 1/4-inch Hex head drill bit.

How can I keep light in but keep privacy?

If you want to completely block out light from a window, the best option is adding a blackout shade or liner. Often referred to as room darkening shades, these offer complete privacy at all times of day, let in no light, and offer no exterior view when lowered.

Can I hang curtains over vertical blinds?

The NoNo Bracket is a specially engineered bracket that allows you to easily hang curtains and dramatically change the look of any room. The bracket attaches to your existing vertical blind head rail with ease. Attaches to outside mount vertical blinds. … Slide the bracket over the vertical blind head rail.

Should outside mount blinds cover trim?

On the one hand, inside-mounted blinds foster a clean, modern look that shows off the window trim. On the other hand, outside-mounted blinds conceal the window trim but do a better job of blocking light. There’s no right choice; it all depends on the room in question and your style preferences.

How do I measure for inside mount blinds?

Inside Mount Measure the width inside the window opening at the top, and round down to the nearest 1/8″ measurement. Measure the height inside the window opening from the top of the window opening to the window sill three times. … Do not take any allowances on the height or width.

How much should I deduct for interior mount blinds?

When you specify inside mount, we will make a size deduction to allow for operating clearance. We will deduct up to 1/4″ from each side (on vertical blinds there is also a height deduction of 1/4″). The deductions are made so that the blind will not rub or scratch your window frame.

Can Roman shades be mounted outside the window frame?

Measuring for roman shades is simple – it’s just 2 easy steps. … Outside mount shades are a good choice if an inside mount is not possible due to little or no window depth. Outside mount shades are mounted outside the window opening on either the wood trim frame or adjacent flat surface area.

How do you hang curtains over blinds without a rod?

Coat Hooks To install them, intersperse the coat hooks at an even distance across the window. Loop the holes through each hook to hang your curtains. Coat hooks are easier to hang than traditional curtain rod hardware and don’t require drilling.

Can you screw blinds to uPVC windows?

Fitting blinds to uPVC windows It is perfectly OK to fit blinds directly onto uPVC windows.

Do perfect fit blinds damage windows?

Can Perfect Fit Blinds Damage Your Windows? No, perfect fit blinds won’t damage your window. They simply click into place thanks to a genius mechanism. In fact, perfect fit blinds can transform your room.

Is it better to have your blinds turned up or down?

If the window is on the ground floor, the blind should be closed slats up. Otherwise, people can see in from the floors above. If, however, you are on an upper floor and the slats are up, anyone can see in from the ground floor. For that reason blinds on an upper floor should close slats down.

How deep should inside mount blinds be?

Inside mount blinds are installed inside the window casing or door, or wall to wall in a room. The window casing must be at least 2 3/4″ deep for flush track mount or 3 3/4″ deep for flush vane mount (See diagram above). Window should have a minimum recessed space of 2 3/8″ for inside mount.

Can you put curtains over outside mount blinds?

The NoNo Bracket is a specially engineered bracket that allows you to easily hang curtains and dramatically change the look of any room. The bracket attaches to your existing vertical blind head rail with ease. Attaches to outside mount vertical blinds.

Does closing the blinds keep heat out?

By closing the blinds, you keep direct sunlight out of your home and reduce unwanted solar heat gain. Closing window blinds can also save energy in the winter. During cold nights, heat is lost through windows. Closing the blinds adds some insulation to the windows, reducing heat loss.

How do you hang blinds without drilling holes?

How To Hang Blinds Without Drilling HolesMagnetic Blinds. The magnets at the back of these brackets make installation a rather seamless process. … Tension Rods. Hang these blinds on a tension rod, which you can position inside your window trim. … Command Strips. … Self-Adhesive Blinds.

Can you mount blinds on trim?

You can mount your blinds to the trim as long as it is flat and meets the minimum requirements for an outside mount. Mounting on the trim of the window is the easiest route because all you need to collect is the size of the trim dimensions.

Do blinds have to fit exactly?

You’re right in thinking that your blinds need to be slightly smaller than the window. But, all of our blinds and shades require slightly different deductions to height and width for the perfect fit. … Just give us the exact size of the window opening and we’ll make blinds that fit perfectly.

Should blinds be up or down in winter?

Turned Down: Rounded Side Facing In Better winter option: turning the blinds down will help direct heat towards the center of the room, utilizing your resources in the winter. More light: because the blinds are facing down, light can stream in from the sun easier, which will flow towards the center of your living space.

Which way should your blinds face for privacy?

The direction — up or down — to close blind slats is a matter of personal preference, but if you want more privacy, tilt them up, with the rounded side facing out. With the blinds tilted up, passers-by can’t see in: The convex side faces the window, creating less space through which to view.

What do you do when your blinds are not wide enough?

The easiest solution for blinds that are too wide is to install them as an outside mount instead of an inside mount. The included installation brackets are compatible with either mounting option, so this is a quick fix.